mardi 21 mai 2013

Mods summary so far / Résumé des modifications

Hello everybody/ Bonjour tout le monde

Comme on me demande de plus en plus souvent les modifications qui ont été faites sur la voiture, je pense qu'il est temps de faire un petit résumé des modifications réalisées jusqu'ici (jespère ne rien oublier)
En bleu les pièces en cours d'arrivage

As I am asked more and more often the mods that have been made on the car, I think it is time to do a quick summary of those made so far (hope forget nothing))
In blue, parts that will arrive very soon.



Base:
1995 Nissan Skyline R33 GTR std (+/- 76000km)

Engine/Moteur :
  • second hand RB26 std dismantled, checked and rebuild with / démonté, vérifié et reconstruit avec :
    • NISMO 1.2mm metal headgasket (joint de culasse metal)
    • NISSAN new gaskets set (autres joints moteur nissan neufs)
    • New piston rings (nouveaux segments)
    • TOMEI oil baffle plate (cloissonnement de carter)
    • TOMEI oil restrictor (restricteur d'huile)
    • MINES Triple baffle plate cam cover (système de récupération d'huile dans les couvre culasse)
    • NISSAN new coils (nouvelles bobines)
    • ACL bearings (coussinets)
    • ARP rods and studs (boulonnerie)
    • NISMO thermostat
    • NISMO oil cap (bouchon d'huile)
    • NISMO timing belt (courroie de distribution)
    • NISSAN N1 water pump
    • NISSAN N1 oil pump
  • GARRET GT2860Rs turbos
  • KINUGAWA turbo hoses (durite turbos style aviation)
  • Reinforced hoses (durites renforcées)
  • GREDDY oil relocation kit (kit de relocalisation du filtre à huile)
  • NISMO water cap (bouchon de radiateur)
Intake & Exhaust / Aspiration & Echappement
  • HKS mushroom filter (admission directe HKS)
  • TOMEI turbo outlet pipe (pipes de sortie de turbo)
  • KAKIMOTO type R exhaust ( ligne d'échappement)

ECU
  • R32 ECU with stage 1 mod (boost pressure 1bar, no more speed limit and some other mods to drive with SP98)
  • HKS EVC boost controller 

Transmission/Suspension
  • NISMO sport coppermix clutch kit
  • TEIN short springs

Interior/habitacle
  • NISMO speedometer (compteur de vitesse)
  • NISMO triple gauge (triple manos)
  • DEFI racer turbo boost gauge (mano turbo)
  • GREDDY multi D/A gauge (oil pressure, oil & water temp) / (jauge pour pression & température d'huile et température d'eau)
  • NISMO floor mat set ( set de tapis de sol nismo)
Audio
  • ALPINE CDA-117Ri
  • DLS 125 front speakers (HP avant)
  • ROCKFORD-FOSGATE Punch series amplifier
  • KAPPA Infinity 62.9i rear speakers
 
Exterior
  • ROTA GTR 18" wheels
  • NISMO S-Tune Side Winker/Marker Set (clignotants latéraux blanc)

vendredi 10 mai 2013

Aesthetic change

Some weeks ago, I bought a 1/18 autoart R33 S-tune and I thought that it could be a nice inspiration to complete the look of my 1/1 model.







So I look for some specialists to realise this idea.
I found one ( http://www.mikedsign.be/ )  not far from home and after some phone and mail exchanges, we agree on a project.

And here is the result.



Autoart R33 S-tune 1/18 and my R33 1/1
My 33 project from rear left
  
My 33 project from front right
I still have a "Format67" to place to finish it but it's almost done. I must say, i'm really happy with this project. It gives the car a nicer look without being "too much".
May be some people will think that the look doesn't completely match the performance but I'm happy with the result.
What do you think?